| Step | | Procedure & Parts & Tools |
| 1 |
|
SEE RUNTIME CHART SHOWN IN THIS STEP. THIS CHART SHOWS EXPECTED RUN TIME FOR THE SIZE OF THE BATTERIES FOR DIFFERENT APPLICATIONS. IF YOUR RUNTIME MATCHES THE CHART, YOUR BATTERIES ARE PROBABLY GOOD.
|
| 2 |
|
CONNECT GRAY CHARGER PLUG ON BATTERY CHARGER TO CHARGER PLUG ON THE BACK OF THE MACHINE. CHARGE YOUR BATTERIES OVER NIGHT OR 8 HOURS.
|
| 3 |
|
VISUALLY INSPECT CHARGER STATUS. IF FLASHING GREEN LIGHT, CHARGER IS CHARGING. IF SOLID GREEN LIGHT, CHARGING IS COMPLETE. IF RED LIGHT IS ON, THE CHARGER IS NOT WORKING CORRECTLY. IF STATUS IS OKAY, CONTINUE TO STEP 4. IF CHARGER STATUS IS NOT OKAY, FIX CHARGER AND START BATTERY TEST.
|
| 4 |
|
LOCATE THE DRAIN HOSES ON THE BACK OF THE MACHINE
|
| 5 |
|
PULL TO REMOVE THE BLUE CAPPED HOSE FROM MACHINE. PLACE HOSE NEAR DRAIN AND REMOVE CAP
|
| 6 |
|
PULL TO REMOVE THE RED CAPPED HOSE FROM MACHINE. PLACE HOSE NEAR DRAIN AND REMOVE CAP
|
| 7 |
|
REMOVE THE 2 TANK BOLTS ON EACH SIDE OF THE MACHINE. THESE BOLTS ARE LOCATED AT THE FRONT OF THE MACHINE AT THE BASE.
|
| 8 |
|
LIFT THE TANK TO OPEN THE MACHINE
|
| 9 |
|
PUT THE RED PROBE ON THE POSITIVE CABLE AND THE BLACK PROBE ON THE NEGATIVE CABLE. VOLT METER SHOULD READ APPROXIMATELY 24 VOLTS.
| Volt meter (True RMS capable) |
&Width=100)
|
|